Instructables

How to Make a Paracord Fender Keychain

Featured

Step 2: BEGINNING THE LOOP

Picture of BEGINNING THE LOOP
Fender Keychain-03.jpg
If you want to create a keychain that is exactly like the one shown, the loop will need to be 3½ inches long once braided and will require 4½ inches of cord to create the loop.

Gather the three strands together and then measure from one end down to 17¾ inches.

Hold the three strands at the 17¾ point, and then grab a strip of tape to secure the paracord together (make sure to place the tape edge against the 17¾ point).
 
Remove these adsRemove these ads by Signing Up