How to Make a Picnic Blanket Backpack Out of T-Shirts

Do you have an abundance of extra t-shirts lying around that you have no use for? Do they not fit you or are they too worn out? Well, with the help of Threadbanger you can take those t-shirts and make your own Picnic Blanket Backpack! All you need is 10 shirts to make blanket, backpack, and even pillow. So whip one up and go outside! For more information, watch the video, and for more Threadbanger diy style, subsribe to Threadheads on iTunes!

Materials:
10 t-shirts, serger or sewing machine, scissors, ruler, pencil, pins

Step 1: Cut the T-shirts into Blocks

Take out one of the shirts, measure a 12 by 15 inch rectangle, and pin the front and back layers together. Use a straight edge to connect your points, cut out the square, and you will have 2 equal rectangles.

Repeat with 7 more shirts and you will have a total of 16 squares.

Comments

[hv3333]

Some treatments for waterproofing wood can also be used on fabric, with only a little loss of flexibility & softness. In the UK, there's a brand called Water Seal that works, find it in the building section of DIY stores.

[rattyrain]

That's actually a good idea, but are there any ways to waterproof with recycled household materials?

[volcanicgiggles]

sweet i made this for my sister for xmas and it came out so cute. great idea and thanks for the post.

[RevelryByNight]

I modified this a bit by adding a layer of batting and sewing the whole thing onto a sheet I got from the goodwill- I also added a couple of shirts to make it 8 x 8 squares. I think the added thickness is a better idea- I would also recommend using a waterproof sheet on the bottom to avoid the wet-grass effect.

[HamatoKameko]

Cool idea. I haven't read through the whole thing yet, but I have a lot of old t-shirts I can't bring myself to get rid of for one reason or another. I'm a packrat. Might as well put it to good use!

[jgodsey]

Instructions unlike patterns are great for their flexibility but I found your instructions almost deliberately vague in spots. There is not a clear image of the final product spread out. are the 4" staps - shoulder straps? which is the 'appropriate' panel for the 2" straps? if you thread them through the holes do they tie to each other? or back against themselves? i would lean towards pairs of 2: straps and tie them to each other but i am not certain what you meant.

[snowmoonelk]

I had exactly the SAME thoughts as jgodsey. The bit about the shoulder straps and "appropriate panel" was done too quickly and I cannot see what was meant!

[threadbanger]

Hey guys! For a better view of the final product, you may want to check out the Threadheads video.

The 4" straps are indeed shoulder straps. The "appropriate panel" for the 4" shoulder straps is the same panel that you pin the backpack flap to (check out the pics -- for ours it was the brown panel).

The appropriate panel for the 2" ties is the panel below the one with the straps. Each tie is meant to thread through the hole and tie to itself.

Thanks for checking out Threadbanger! Anymore questions please ask, and share with us your creations!!

[reedz]

This is pretty awesome, it's a great way to recycle old clothes. One made of jeans would be pretty awesome and extra durable. 5/5 for the detail in the pictures.

[Valche]

I love you, Threadbanger! You two have some amazing ideas, thank you for making the world a more wonderful place by sharing them with all of us :). Great stuff!