Instructables
Ever thought about being able to play your favorite game system anywhere? I'm sure you have. Following this guide, you can learn how to 'portablize' the Nintendo Entertainment System.

In this Instructable I will teach you everything you need to know to put together a portable. There will be several different sections:

- What batteries to choose
- How to make a case
- How to wire everything
- What screen to get

These are just the basics. All these and much more will be discussed in this Instructable.

The console highlighted in this tutorial is the Nintendo Entertainment System. I chose it because it has tons of awesome games and it is easy to make handheld. The total cost of this project - for me at least - was $200. Now don't freak out - your price will be much lower. It was so high for me because I broke the first screen and NES. That set me back about 70$. :P You won't make the same mistakes, because you are going to learn from mine.

Now, this project is not for the lazy. It is not easy. It is not cheap. But the reward is worth so much more than what you spent, that you won't even care. :) My portable NES took me about 4 months to build, so lots of dedication is needed.

This Instructable will play with a new format; because the parts list is so huge, it would be ridiculous to post it all in one step. So, for each individual step, I will write the parts and tools needed for that one step. I will tell you one thing: get some IDE cable. That's the stuff that is used to connect hard drives inside of computers. IDE cable is invaluable to any portable. It's amazing stuff, and you will use it many times in this project. Get some in advance.

This project requires that you already have the basic knowledge to solder, use tools, simple stuff like that. This guide assumes, however, that you would have no clue where to start when building a portable. This tutorial is for you.

I urge you to read the following steps on picking and ordering a console, screen, and batteries. They contain very useful information and will help you greatly. It may seem like a lot to read, but please look at it all.

Now, let's finally get to the Instructable. :)
 
Remove these adsRemove these ads by Signing Up
1-40 of 1240Next »
Ian helms5 months ago
I think u should enter the gaming contest 1up
Awesome! Thanks for the help!
BULBASAUR-228 months ago
hi, I'm preparing to make a portable system but my knowledge of electronics isn't very comprehensive. I have a question about batteries. if the system I want to make portable has a hiher voltage than my batteries will it work? or do my batteries have to have a voltage equal to or greater than what it is trying to power as long as I build a corresponding regulator?
darkevil479 months ago
I love this instructable, it is going to be very helpful when i make my own. I was wondering, would there be an easy way to add a battery life indicator so i know when the battery is about to die?
PREDiTorT610 months ago
Where can i buy a case for creating such a device and also a screen?
Jaako11 months ago
I tried to do this to my nes and the whole 4th pin popped out and my nes doesnt turn on anymore! Can you help please? Ps. Sorry for my bad english.
kishore13611 months ago
superb
it worked for me
chet542611 months ago
Lucas61611 year ago
I understand everything having to do with Av cables and other things like that but I have trouble understanding batteries. I would like to use conventional batteries and I only care about performance. The thing is whenever I look up tutorials people bring up regulators and stuff I don't understand. I don't even know how to power the console with batteries. You said nothing about where to plug the batteries in pr where the cables would go. I took apart my game cube and now it doesn't work and I didn't even change anything inside it. I am worried to take apart my new and overheat it like my game cube. Please reply and thanks for this thread thing because I understand little more about batteries now.
nradant1 year ago
define what you mean by "remove the wires" pull them out of their thing or what?
JakeCon1 year ago
wow! nice job! awesome!
I can't really tell from the pictures, so I wanted to ask - how can you make sure that the new cartridge port is installed the correct way? Does the cartridge only go one way into the port, and that's how you know which way to solder it on?

Thanks for the great instructable! I'm not planning on making a portable soon, but I just happened upon a couple of NES boards without cases, and was thinking about making cases for them, and putting a standard cartridge port out the back instead of messing with the finicky ZIF socket.. Your information on where to get the ports is very helpful.

Also, could you let me know where the wires from the power and reset buttons on the case go to the blue connector on the NES motherboard? I don't have a case to check, and I'll be needing to add my own power and reset buttons.
my nes died. cpu gets hot fast and blue screen when powered on. i have replaced the connector. anything else i can do?
also i reverse engineered a portable dvd player lcd to work without the dvd player control circutry and it now takes composite. 7 inch diagonal screen
bhen091 year ago
This step seems a bit vague, what piece of equipment will I need to use these batteries with the system?
wes21031 year ago
Would a orig. ds screen work
Definately not, it needs av in, ruling out most screens like that.
wolfina21 year ago
So if I was using a DVD player.. How would I achieve the connection.. Doesn't the NES take AV Input? At least mine worked when i used a Red yellow white cable...
perhaps you could use right angle brackets to hold a piece of acrylic perpendicular to the shell to support the came cartridge?
another fantastic idea! ive made a few xbox 360 laptops but ive over looked making them completely handheld. i might actually try it but without a doubt it would take a lot of time. great how to!
Analton1 year ago
This is the most AWESOME instructable that i've ever seen.
The detailed explanation is a great bonus.
Excelent work!
how do you do that with an original xbox?
From what I have read on forums, a handheld would be EXTREMELY hard because it i big and there isn't much that can be removed. However, an xbox laptop wouldn't be out of the question, but still challenging.
or an xbox 360?
or an xbox 360?
I see you have overscan issues with the screen just like me. My PSOne screen is hooked to my model 2 Sega Genesis through direct RGB. No resistors or capacitors. I get a clean signal surprisingly but the screen is shifted a bit off center and has borders all the way round. Any ideas on how to fix it or am I SOL?

It also has some garbage showing up in bottom border area but that is from a factory glitch in the Genesis hardware and thus unsolvable unless I start replacing chips.
will this work http://www.onlybatteries.com/showitem.asp?ItemID=11559.47&cat1=20&uid=1096&utm_source=shopzilla&utm_medium=versafeed&utm_term=11559&utm_content=hitech&utm_campaign=rechargeable+replacement+batteries+11+510+200&sid=shopzilla-com
does the voltage matter?
Krayzi991 year ago
I will be making a portable gamecube. i was trying to find some Li-Ion Batteries for my portable, and, this being my first portable, i had no idea what to get. could you give me some things ( if there are any :P ) to look for in a battery?
also, if it helps, both the 'cube and the 4.3 inch widescreen takes 12 volts.
I was thinking about using an LCD from an old Laptop. I got the data sheet from what I can tell, but I am unfamiliar with it. Could you help me put together a power regulator for it? Or maybe point me in the right direction?
Could I use this same step by step for a gamecube?
1up (author)  ReagenFan971 year ago
Not exactly, considering the GC is a completely different system. :P You'll need a bit of ingenuity to adapt these directions to a Gamecube. Keep in mind it draws quite a bit more power as well.
Okay thanks! Could you link me up to a gamecupe portable page please? Also could I use the same wires in a gamecube portable you mentioned in the other comment (18-22)?
1up (author)  ReagenFan971 year ago
You can look on forums.modretro.com in the Gamecube section, but I'm not sure if anybody's written a full guide for it. In fact, there are really no guides for portables because they take so long to make.

And yes, that's a good wire size for the power lines for a GC.
Okay, thank you very much for your help and info! this has helped me alot.
18-22 AWG wires?
What kind of wires would I need? Would I need a specific kind of wires?
1up (author)  ReagenFan971 year ago
IDE cable works well for just about everything but power. With the NES it's fine because it draws so little current, but with something heftier you'll need thicker wires for the power lines. Something like 18-22 AWG will be fine.
mrmerino1 year ago
Compare to today, where you need expensive tools, a master's degree in engineering and special permission from the company to open up your cellphone.
i soooo had those when i opened my iphone
1-40 of 1240Next »