For my future projects I decided to make a simple servo shield on prototype PCB. With this shield you can control up to four servo motors, but it is always possible to modify the shield adding more pins for more servos.

Step 1: Tools & Materials :

Step 2: Cut Pin Headers With Cutter in Eight Part

Step 3: Cut Prototype PCB With Cutter a Half

Step 4: Solder the Components

Step 5: Circuit Layout

Step 6: Continuity Test

<p>I have made several of these. Making them yourself is so much cheaper than buying a commercial servo shield.</p>

About This Instructable




More by KMOD97:How to Make a Servo Shield on Prototype PCB 
Add instructable to: