Step 1: Supplies
1. A cotton T-shirt (I used a old camp T-shirt that does not fit)
3. A handful of sowing pins
5. A sowing machine
6. A Pillow in need of a case
Step 2: Sleeves
A. To start off fold your T-shirt inside out.
(so that you can not see the logo)
B. Then, pin one of the sleeves of your shirt at the seem as in picture 2.
C. Now,(with a sewing machine) you will need to stitch along were you've pinned your shirt as in picture 3.
D. Next remove any unwanted thread from the sleeve and your sleeve should look like picture 4.
E. Finally repeat steps B. C. and D. for the other sleeve.
Step 3: Collar
B. Next pin the collar down, along the seem as in picture 2.
C. Then stitch the collar up (with your sewing machine) along the pins.
D. Once you have finished sewing the collar together it should look like picture 3.
E. Now fold your shirt right side out.
(so you can see the logo, but no seems)
Step 4: The Last Step
Stuff the pillow in it's new case!
Congrats! Give yourself a pat on the back, because you have just made (or found out how to make) your very own T-shirt pillowcase!
Have any Questions?
Leave a Comment.
2008 The Magical Duct Tape Kid