Make a Web Connected Robot (for about $500) (using an Arduino and Netbook)

Step 2 Cutting Pieces & Assembly

There are three options for getting pieces for your laptop desk.

Cutting

Option 1: (Purchasing from oomlout.com)

• laser cut desk pieces and the neccesary hardware are available from oomlout for $25 (here)

Option 2: (Cutting on your own laser cutter or Ponoko.com)

• Download the file below (03-WEBB-Acrylic Parts.cdr or 03-WEBB-Acrylic Parts (Ponoko P2).eps)
• Cut them from 3mm (1/8") Acrylic

Option 3: (Scroll Saw)

• Download the scroll saw pattern from below (03-WEBB-ScrollSaw Pattern (A4).pdf (for A4 size paper) or 03-WEBB-ScrollSaw Pattern (letter).pdf (for letter sized paper))
• Double check that it hasn't been scaled when printing (by measuring the printed rulers)
• Glue to a piece of 3mm (1/8") acrylic and cut the pieces out.

Assembling:

Download the assembly guide (04-WEBB-Assembly Guide.pdf) below and put the laptop desk together.

Comments

[ZsurzsaLaszlo]

Hy, can someome tell me where can i find the Pattern for the wheels and the lower part of the robot?

Thanks,