Print PDF
Favorite
Email
Step 5Attaching the Beanie
In this step you will be attaching the beanie to the mask. This will be the primary fitting of the mask, so make sure you get a beanie that fits nice and snug and is comfortable for you.
Materials Needed:
- Needle and thread
- Beanie
Ok, so quite obviously (from my pictures) you can see that you don't need to know how to sew to get this done! As you can see in pic 2 & 3, I have attached the bottom part of the beanie to the brow piece.
Remember, this can also be done with hot glue, but I'm not sure how easily it might come off.
Just remember to pull the thread tightly, and lace it many times so that it stays secure. I would do one brow at a time, and then re-enforce the middle section.
Then, as seen in Pic 5 & 6, thread the top foam piece as high up the beanie as you can.
Make sure to try it one at this step. If anything feels out of place, fix it now!
Materials Needed:
- Needle and thread
- Beanie
Ok, so quite obviously (from my pictures) you can see that you don't need to know how to sew to get this done! As you can see in pic 2 & 3, I have attached the bottom part of the beanie to the brow piece.
Remember, this can also be done with hot glue, but I'm not sure how easily it might come off.
Just remember to pull the thread tightly, and lace it many times so that it stays secure. I would do one brow at a time, and then re-enforce the middle section.
Then, as seen in Pic 5 & 6, thread the top foam piece as high up the beanie as you can.
Make sure to try it one at this step. If anything feels out of place, fix it now!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
