Step 3: Schematic
As you can see right away, the hearth of this project is the LM 555 timer chip.
( the 3rd drawing shows the functions of the 555 timer chip pins)
Our Connections are:
-Pin 1 of the chip is connected to pin 6 via the 22uF capacitor. Pin one is also the base ( 0 V supply)
-Pin 2 is connected to pin 6
-Pin 7 is connected to pin 6 via the 250K Potentiometer
-Pin 4 is connected to pin 8
-Pin 4 is also connected to pin 7 via the 1K Resistor
-The speaker is connected to pin 3 via the 22uF capacitor and to pin 1
Later in the Instructables we will go into details and trough all the remaining connections.
Now, lets start making our Metronome !
Remove these ads by
Signing Up











































Visit Our Store »
Go Pro Today »




My son and I were thinking about making a metronome which would have his drum teacher's voice yelling "COUNT!" This looks like a good start. Would you (or someone) please suggest enhancements so we could add our own sounds?
Thanks!
It's all in the LM555 timer. The configuration of resistors and capacitors is what determens the frequency, the time between blink, the ON/OFF time...
Google IC 555 timer and learn more!
Feel free to ask anything more!