Print PDF
Favorite
Email
Step 4Planning your Metronome
Before we turn on our soldering iron and start making connection we need to plan how our Metronome will look like.
Take the 4 most important components ( Speaker, 2 LEDs, LM 555 chip and the Potentiometer ) and plan where they will be located on your board.
As you can see on the picture below, I put the 2 LEDs on the top, the speaker in the middle, the potentiometer on the bottom and between them the chip.
How will you arrange the components depends on the shape and how long and wide your board is.
Take the 4 most important components ( Speaker, 2 LEDs, LM 555 chip and the Potentiometer ) and plan where they will be located on your board.
As you can see on the picture below, I put the 2 LEDs on the top, the speaker in the middle, the potentiometer on the bottom and between them the chip.
How will you arrange the components depends on the shape and how long and wide your board is.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
