Picture of How to Make an Instructable
In learning how to make an Instructable, it seemed that it would be fitting if there were an Instructable on how to make an Instructable. Here goes nothing.
Remove these adsRemove these ads by Signing Up

Step 1: Step 1 - Getting Started

Picture of Step 1 - Getting Started
First, navigate to the Instructables homepage. Next, click on "Create."

Step 2: Step 2 - Pick a Path

Picture of Step 2 - Pick a Path
Instructables provides three options for your finished product: Photos, Step-by-Step and Video. Whichever you choose is great. This Instructable is walking you through the setup of a Step-by-Step Instructable.

Step 3: Step 3 - Intro

Picture of Step 3 - Intro
Start out by choosing a title and writing a short introduction to your Instructable.

Step 4: Step 4 - Uploading Images

Picture of Step 4 - Uploading Images
Screen Shot 2013-01-18 at 11.02.25 AM.png
Screen Shot 2013-01-18 at 11.02.48 AM.png
Images are a great way to get across clear instruction in your Instructable. To get started, scroll down below the space to enter text and choose "SELECT FILES" (see image 1).

In the drop down dialog box, select the image(s) you'd like to add (image 2, arrow "a"), then click "Open" (image 2, arrow "b").

Finally, check that you have selected the right files (image 3, top arrow), then click "Upload Files" (image 3, bottom arrow).

Step 5: Step 5 - Adding Images to a Step

Picture of Step 5 - Adding Images to a Step
Once your images have uploaded, they will go into "your library" (arrow a). If they have not added automatically to the "Attached Images and Files" section, drag and drop the images from "your library" to that section (arrow b).

Step 6: Step 6 - Adding More Steps

Picture of Step 6 - Adding More Steps
To add your following steps, click the "Add Step +" button towards the top of the page. Repeat the previous steps as necessary until you have completed the demonstration of your process.

Step 7: Step 7 - Publishing and Sharing

Picture of Step 7 - Publishing and Sharing
Screen Shot 2013-01-18 at 11.49.33 AM.png
Screen Shot 2013-01-18 at 11.49.40 AM.png
When you have finished, and have double check your spelling and image placement, click the tab named "Publish."

Next, after selecting tags, categories and your type of license, scroll down to the bottom of the page and select the "Yes, publish my Instructable!" button.

Finally, click on the tab named "Share" and get the word out about your new Instructable.
knexGuy842 years ago
Im am tad bit confused on this part