With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is a fun and inexpensive USB drive project, and to me it looks a lot better than regular usb drives!
For this little instructable you are going to need the following: 1. Instructables sticker or Instructables robot print out(you can win the stickers ...
Now get your cardboard and sticker (or print out) and lay it on top of the cardboard. Then get your pen and trace around the sticker.
Once you have traced the sticker on to the cardboard get your scissors and cut along the black line.
After that get your USB drive and put hotglue one side.
Get your cardboard and apply it to the hotglued side of the USB drive.
Now all you have to do is stick on the sticker (or apply some hotglue if your using a print out) to the cardboard and then you will have completed you...
Remove these ads by
Signing Up
Not NiceInappropriateSpam2,348 views
2 favorites
Posted:
May 21, 2011
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »