Print PDF
Favorite
Email
Step 2Provide holes for gasses to escape and Burn
Next, you need to provide holes in the pipe under the drum. The point is to create a large burner-like thing.
I drilled 1/4 inch holes every 3 inches in both sides of the tube. Later I thought that might not be enough so I used my die grinder to cut 3 slits in the top of the pipe so that the gasses would be directed more directly at the drum.
I drilled 1/4 inch holes every 3 inches in both sides of the tube. Later I thought that might not be enough so I used my die grinder to cut 3 slits in the top of the pipe so that the gasses would be directed more directly at the drum.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
