Introduction: How to Program Led Strip With Trinket Pro

Picture of How to Program Led Strip With Trinket Pro

This is a tutorial to program led strip with trinket pro.

Step 1: Materials

Picture of Materials

The materials are:

  • Trinket pro 5v.
  • Usb micro-B plug.
  • Wires.
  • PC.
  • Led strip.
  • Battery 3.7 - 5v.

Step 2: Connect

Picture of Connect

Take to wire and connect the power.

Step 3: Connect 2

Picture of Connect 2

We proceed to do all the connections like we see in the picture.

Step 4: Bootloader

Picture of Bootloader

Now we put the trinket in bootloader mode and upload the program.

The program can be download here:

Step 5: Led Strip

Picture of Led Strip

Connect the led strip to the board.

Step 6: Battery

Picture of Battery

Disconnect the cable and connect the battery.

Step 7: Final

Picture of Final

Finally we can see the led strip is turn on.


About This Instructable




More by emills05:How to Unlatch Nail GunHow to Put Light to Epilog Mini 18, 24 and HelixHow to Make a Roll for Vinyls
Add instructable to: