Instructables

How to Program a Cue using Martin M2PC

Picture of How to Program a Cue using Martin M2PC
This tutorial will show you how to program a cue for a show using a Martin light board and M2PC.
 
Remove these adsRemove these ads by Signing Up

Step 1: Step 1. Selecting the Lights

Picture of Step 1. Selecting the Lights
100_2295.JPG
Using the M2PC program, select the lights you want to be used in the cue. If LEDs are included, make sure to choose their color.

Step 2: Step 2. Setting up Cue

Picture of Step 2. Setting up Cue
100_2305.JPG
100_2306.JPG
After selecting the lights, hit the RECORD button on the light board, then press the CUE button. Using the number pad, type the number of the cue, then press ENTER.