Introduction: How to Repair Broken Lamps (CFL Lamp)

By

We use Some parts of CFL lamp to repair it and reuse this lamp

We need a (broken lamp) and the other parts as shown in picture

1- 12 Volt Led any type but it must be run on 12 Volt.

2- 0.5uf capacitor or 474 capacitor.

3- 1 Mohm resistor.

4- 16 V and 1000 uF capacitor or any value avilable but the voltage must be above 16 V

The desighn of The lamp can change from lamp to other one but the idea is the same.