How to Replace the Cabin Air Filter : Mitsubishi Lancer 2007-2015




Introduction: How to Replace the Cabin Air Filter : Mitsubishi Lancer 2007-2015

This video will show you step by step instructions on how to replace the cabin air filter on a Mitsubishi Lancer 2007-2015.

If you liked this video and found it helpful feel free to like, share, and comment to help us bring even better content. For more oil reset and DIY maintenance, make sure to subscribe to our channel!

For any question or suggestion, post a comment below or send us an email to:

Step 1:

1- Open the glove box.

Step 2:

The glove box is held up by two stoppers with one on each side of the glove box.

2- Push both sides of the glove box inward and pull down .

Step 3:

3- Unclip the retaining arm by gently prying sideways.

Step 4:

4- To remove the cabin air filter cover, lift the fastener on the right side of the cover and then pull it straight off.

Step 5:

5- Slide the old cabin air filter out.

Step 6:

6- Slide the new cabin air filter back in with the air flow direction indicator arrow pointing down.

Step 7:

7- Line up the cabin air filter cover and push it into place until the fastener make a "click" sound.

Step 8:

8- Lift the glove box until the stoppers are back to their original place.

Step 9:

9- Replace the retaining arm by pushing it back in place.

DONE!!! :D



    • Paper Contest 2018

      Paper Contest 2018
    • Science of Cooking

      Science of Cooking
    • Pro Tips Challenge

      Pro Tips Challenge

    We have a be nice policy.
    Please be positive and constructive.