Introduction: How to Run a Challenger

Picture of How to Run a Challenger

today i will teach you how to run a challenger

Step 1:

Picture of

Put the key in the ignition

Step 2:

Picture of

Push the clutch in

Step 3:

Picture of

Hold the clutch in and turn the key to on position

Step 4:

Release the clutch to go into neutral

Step 5:

Take parking brake off

Step 6:

Push clutch in and put the shuttle shift into forward

Step 7:

Push lever on right hand console forward to speed up

Step 8:

Step 9:

Picture of

Pull the lever back to slow down

Step 10:

Picture of

How to engage the PTO

Step 11:

Picture of

Put the tractor in neutral

Step 12:

Let the tractor idle

Step 13:

On the right side there is a yellow switch that is yellow u push

Step 14:

Wait to hear the pto running

Step 15:

and now we're ready to run the tractor


Swansong (author)2017-03-22

Thanks for sharing :)

About This Instructable




More by LoganM63:How to Run a Challenger
Add instructable to: