Introduction: How to Set a Basic 2 Button Digital Watch

Picture of How to Set a Basic 2 Button Digital Watch

My wife owns an online store which among other things sells Basic Digital Watches.

These watches only have two buttons, one Set (bottom) the other Select (top).

After many complaints about not being able to set the time and date on the watch i went looking for instructions to send to her customers, but to my surprise there is no instructions online to do this.

In this Instructable i will step you through the process to set the time and date.

Step 1: Month

Picture of Month

Press set (bottom) button till it matches the watch in the photo.

Press Select (top) button till Correct month is displayed.

Step 2: Day

Picture of Day

Press set (bottom) button till it matches the watch in the photo.

Press Select (top) button till Correct day is displayed.

Step 3: Hour

Picture of Hour

Press set (bottom) button till it matches the watch in the photo.

Press Select (top) button till Correct Hour is displayed.

Note: on the right of the screen it will display an A or P, for Am or PM

Step 4: Minute

Picture of Minute

Press set (bottom) button till it matches the watch in the photo.

Press Select (top) button till Correct minute is displayed.

Step 5: Finish

Picture of Finish

Press set (bottom) button again and you should see the current time

Press Select (top) button to start the clock ticking (indicated by blinking ":").

Hope this Instructable was helpful, Some times the orientation of the buttons is slightly different to this one, but the process to set the watch is the same.

Comments

About This Instructable

89views

1favorite

License:

Add instructable to: