3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

How to Sew.

Step 3Finishing with a knot!

Finishing with a knot!
«
  • knotting1.JPG
  • knotting2.JPG
  • knotting3.JPG
  • knotting4.JPG
  • knotting5.JPG
  • knotting6.JPG
  • knotting7.JPG
  • knotting8.JPG
  • knotting9.JPG
  • knotting10.JPG
  • knotting11.JPG
  • last photo ←
»
I'm going to show three ways to knot. The way you knot might depend on what you're sewing, but most of the time it will be whatever is easiest for you.

Lots of pictures, I know, but the knots are color coded. :D

Purple thread - Knot #1 - This is used for doubled thread. Cut the thread right below the eye of the needle. You will now have two tails. Tie these tails in a standard knot. I normally do this a few times!

Pink thread - Knot #2 - This can be used for single or doubled thread. Hold the needle with one hand and the thread in the other. Loop the thread counterclockwise over the needle and pull it through. You'll now have the beginnings of a knot. Guide the loop down to the fabric and tighten - I normally use my finger to keep the knot in place while it tightens. Do this twice!

Green thread - Knot #3 - You'll need to make sure you have a stitch on the back or wrong side of the fabric that's close by. Take your needle and slip it under the stitch to form a loop. Guide your needle through the loop and tighten. I normally do this two or three times.

Can you tell I like knot security? ;)
« Previous StepDownload PDFView All StepsNext Step »
1 comment
Dec 31, 2008. 12:31 AMcofosho says:
Try a surgeon's knot to hold down the knot (like in the purple instance). It's like a standard square knot, except make two turns (or passes, if you will) instead of one and the friction will hold down the first tightening.

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
1029
Followers
112
Author:jessyratfink(making jiggy.)
Follow me to find out more about some of our favorite authors! I will also bombard you with new recipes and crafty things. :D I've had my work featured on Jezebel, BoingBoing, Gizmodo, LifeHacker, oh...
more »