Introduction: How to Transfer Data Between Windows/Mac and Raspberry Pi Via WiFi
Whenever you try to transfer a file between your Windows/Mac PC and Raspberry Pi, it is a bit time consuming because you need to send it to your SD card first, then insert that card to Pi. So a pretty boring and traditional format of file transfer. How about making it easier?
In this Instructables, we have discussed how to transfer file between your Windows/Mac platform and Pi via WiFi network. So let's begin.
Step 1: Make Sure You Know How to Use Raspberry Pi
First, we hope you know how to use Raspberry Pi. If you are a beginner, then do check out our other Instructables.
- How to install Raspbian OS in SD Card for Raspberry Pi - https://www.instructables.com/id/HOW-TO-INSTALL-RA...
- How to use your Android device as a monitor for Raspberry pi - https://www.instructables.com/id/HOW-TO-USE-ANDROI...
- How to use your Linux device as a monitor for Raspberry Pi - https://www.instructables.com/id/How-to-Use-Your-L...
- How to use iOS devices as a monitor for Raspberry Pi - https://www.instructables.com/id/How-to-Use-Ios-De...
- How to use Windows laptop as Raspberry Pi monitor - https://www.instructables.com/id/How-to-Use-Window...
Step 2: Download and Install FileZilla
- Browse FileZilla. Click on the first search result.
- You will see 2 options: Download FileZilla Client and Download FileZilla Server. Select the Client and download it.
- Install it. It's easy. Check the video if you wish.
Download link - https://filezilla-project.org/
Step 3: Pair With Raspberry Pi
Now you will have to note the IP address of Raspberry Pi.
So go to your admin page router -> LAN setup and find the IP address. For us, it is 192.168.0.105.
Write that IP in the Host box, give the Username as pi, Password as raspberry and Port as 22.
Click on Quickconnect. Check the video if you want.
Step 4: You Are Done. Send Your File.
To the left, you can see Local Site which is your computer and to the right, the Raspberry Pi platform.
So select any file, drag and drop it in the Pi section. Once the transfer is complete, you will get a notification. (See the video).
So that's it. Pretty simple, isn't it?
I hope you have enjoyed this Instructable and video. If you have, then don't forget to Subscribe to our channel guys.
You can follow us on social media. The links are given here. Don't forget to leave a thumbs up in the video and share if you like it. We will see you in another Instructables and video. Peace. :)
Facebook Page: https://www.facebook.com/being.engine...
Follow us on Twitter: https://twitter.com/Being_Engineers
Visit our site - www.being-engineers.com
We have a be nice policy.
Please be positive and constructive.