Introduction: How to Use App to Control Your LED Strip

Picture of How to Use App to Control Your LED Strip

Arduino library for controlling single-wire-based LED pixels and
strip such as the Adafruit 30 LED/meter Digital LED strip, the Adafruit FLORA RGB Smart Pixel, the Adafruit Breadboard-friendly RGB Smart Pixel, the Adafruit NeoPixel Stick, and the Adafruit NeoPixel Shield. We based on these and LinkSpriteIO make it can be controled by mobile phone ,to achieve a number of simple functions with LinkNode D1.

1 Hardware connection

LinkNode D1 LED Strip

5V +5V

GPIO2/D9 D0

GND GND

2 Install Apk

Download LinkspriteIo.apkInstall Linksprite.apk 3 Register Or Login

Enter to the login page

If not register,Please register

Step 1:

Picture of

4 Create Device
If not have device,Please click + icon to add device

Please choose ADD button to create a device

Fill in the name of the device and group name, and click the confirm button to create the device

Step 2:

Picture of

5 Upload arduino code
Download LinkSpriteIO anduino libraryDownload NeoPixelBus arduino libraryInstall libraries in Arduino Libraries folder.Restart Arduino IDE, then open File->Examples->NeoPixelBus->LinkSpriteIoT sketch.Open the website LinkSpriteIO,and sign in get your deviceID and apikey.

change deviceID and apikey of program by your LinkSpriteIO device.

Upload the code to LinkNode D1,and then you can use your mobile control the led strip.
If you’ve never used D1 LinkNode,you can learn from here.

6 LED Strip Control

Please choose the device button to set device

LED strip how to show:
1.Flowing water lights

2.Bln control

3.Blink

4.Custom

Set the flowing water lights
Set the total number of LED strip:Total

Set the time of flowing water lights:Tim

Set bln control
Set the total number of LED strip:Total

Set blink
Set the total number of LED strip:Total

Set the time of blink:Time

Set custom
Set the total number of LED strip:Total

Set the start number which :Start

Set the end number:End

Set the color of LED:Color (Four color:Red,Blue,Green,White)

Step 3:

The original post is:

http://learn.linksprite.com/project/led-strip/

You can also get more information from my facebook:

https://m.facebook.com/?_rdr

Comments

About This Instructable

345views

15favorites

License:

Bio: Let's play together! All about pcDuino,Arduino,Raspberry pi and technology. My facebook :Sherry Wu https://m.facebook.com/sasha.wu.775
More by shansa wu:How to Use App to Control Your LED StripPano 360 Virtual Reality Photo Shot With PcDuino8 UnoTutorial of Using E-paper Shield on Arduino
Add instructable to: