Introduction: How to Use Serial I2C 128x64 OLED Display Module With Arduino Uno Rev3

Subscribe to our YouTube Channel: https://goo.gl/Ah3izH

YouTube: https://goo.gl/LCcXcu

Instructables: https://goo.gl/gwY1Lq

Facebook: https://goo.gl/Cn2hZB

Twitter: https://goo.gl/XZufMV

Google+: https://goo.gl/5FddS1

Copyright © 2018 AVI SOFTWARE INDIA. All rights reserved.

Step 1: Components Required

Arduino Uno Rev3

128x64 OLED Display Module (Serial I2C)

Breadboard

USB Cable (Type A to Type B)

Jumper Cable

Step 2: Circuit Schematic

Connect SCL Pin of OLED Display Module to SCL Pin of Arduino Uno Rev3

Connect SDA Pin of OLED Display Module to SDA Pin of Arduino Uno Rev3

Connect VCC Pin of OLED Display Module to 5V Pin of Arduino Uno Rev3

Connect GND Pin of OLED Display Module to GND Pin of Arduino Uno Rev3

Step 3: Wiring Components As Per Circuit Schematic

Step 4: Coding

Check YouTube Video Description Box for Download Source Code

Step 5: Watch Project Demo

For Best Viewing Experience, Choose Video Quality to 1080p

Comments

About This Instructable

93views

2favorites

License:

Bio: Tutorials on Software | Programming | Hacking | Mobile Development | Much More
More by avisoftwareindia:How to Use A3144 Hall Effect Sensor Module With Arduino Uno Rev3How to Use 4x4 Matrix Membrane Keypad Module With Arduino Uno Rev3How to Use DS3231 Real Time Clock Module With Raspberry Pi 3 Model B
Add instructable to: