Picture of How to Use Your Camcorder as a Webcam
If you are like me you have a lot of friends that have moved away from home, and are living thousands of kilometers away, or you have friends that you went to university with that are all living in different places. I personally hate phones and instant messaging but when you combine their features with a webcam, it is almost like you are hanging out with those friends again. You can see them, their families, their messy rooms. It makes chatting a lot more fun. Downside is you need a webcam and the best webcams have quality issues.

So I found a way to use my camcorder as a webcam!

Step 1: What do you need?

Picture of What do you need?
You will need:

A Camcorder (Firewire or Analog)
A Firewire Card (For Firewire Camcorder)
A Video Capture Card or TV Tuner (For an Analog Camcorder)

A way to connect the Camcorder to the corresponding cards.

The Eagletron TrackerCam Software.
Go to trackerCamhttp://www.trackercam.com/TCamWeb/download.htm to download it, it is a free download. You need additional hardware to get full use of the software, but for a basic webcam this software is enough.
PeterF84 months ago

I've changed computers from a 2006 MacBook Pro with Firewire and USB to a 2014 iMac with USB only. My sole camcorder is a Sony DCR-TRV320 that works great with Firewire. Also, the only USB capture card I have is a Dazzle, but that only works with its proprietary capture software. I doubt it can be used for other purposes. Cannot USBs be retro-fitted for Firewire or vice-versa?

starpause1 year ago
Has anyone done similar with a macbook? TIA for any tips! Bonus points if the webcam can be picked up via html5 tech like WebRTC in FF/Chrome ala http://stackoverflow.com/questions/14610945/how-to-choose-input-video-device-for-webrtc
cjh5673 years ago
Hey i own a canon legria HF m406. I have tried to find a way to use it as a webcam for my computer but what ever different ways i try to search for it, it just come's up with reviews. When i plug the camcorder in it only show's it as an memory device and you can look at the folders like DCIM and PRIVATE. When i go into devices it show's as "video camera". Please help!
syra4 years ago
I am very impressed by the low light performance of the Camcoder. Of course, compared with a three-chip camera with 1/3 inch. CCD has not been very impressive, but considering the price category, it is very surprising. There was very little grain produced when the camera shoots in low light. And the camcorder produced an image reveals some details on what is considered the lighting conditions of candle light. In medium low light conditions the camera did pretty well. And under normal environmental conditions, technically, in low light, the camera performed amazing. It is really cool.
csmiler6 years ago
I have an old "movie cam" which records on tape...but can connect to a pc....will it work?

I know this is an older post but if it helps someone....

I am using an RCA  (tape) Auto shot. 200X Digital Zoom w/colorview screen 2.5 inch plugged in to the transmitter of a  Terk Leapfrog with the Terk Receiver plugged in to the video card on a Windows 7 Ultimate system.  I have 12' connecting cables if I want to move it around the room and It works very well.  The only draw back I have had issue with is only certain video software will work with it.  Honetech 4.0 works well.

This configuration (Terk LeapFrog) will also work with VCR's, TV and Audio
Sorry forgot the Terk pic
wildman3655 years ago
it didn't work for me for some reason, I have a USB connector for my camera and still cant get it on
Great dude. Where did you get this idea from. But it will require lots of space and more wires to get it working. But very great move. http://www.digitaldesires.net
A reasonabl WEB CAM would cost equal to a Firewire and a FireWire PCI Card. 

bernardnz776 years ago
Good day, I have install already the trackercam but when i use it it says; "No camera selected or the selected camera cannot be used! You can select one or continue without camera. Your camera may be in use by another application;. When i try to open the webcam on my yahoo messanger it says ;"P lease run Trackercam soft ware to use this driver".. please help me what im going to do to get it work.. the model of my video camera is DCR-SR45E.. Thanks and i look forward for your kindly responce. bernard
Wesley16 years ago
will it work for a digital camera?
ClayOgre6 years ago
Alas, I am on a Mac. But I have an older Sony Digital 8 camcorder that works as a webcam with Skype. The only problem is, that after a time, unless you are actually recording, it goes into "demo mode" and you have to turn it off and then back on.
i have a cannon FS100 and i think it has the ability to be a webcam with the software but i cant work it out so what shall i do, it has a usb connection but trackerware doesnt pick it up xx
chayimlife6 years ago
I have a Mac running OSX.3.9 10.3.9 can I use my analog camcorder ? will these softwares work in apple OS? I have a digital camera that has video mode.. can I use it... it uses a USB. out
great article but i cannot get the audio to work any ideas? doc
the audio will not work because you are plugging in the video cable not audio. as for how to get audio maybe if you have an audio/3.5 jack converter than you could connect audio.
hi _ i got the same camcorder but a bit newer so it can get pluged by usb cable will it work anyway?

pm me plz
wildgift7 years ago
Pop open that door where you insert the tape. Leave it open, and it seems to keep the camera on.
Violetray787 years ago
hey all...
question, would this work on a laptop? I have a Compaq Presario V6205NR Noteboo PC...
jesterday (author)  Violetray787 years ago
You can do it with a laptop if you have a USB Analog Video Capture Device or a firewire camcorder.
thanks so much...Im gonna try it...
bricoleur7 years ago
That is easy, but when I've tried it with several really old analog VHS camcorders, they had built in circuits that cut them off after a few minutes of tape inactivity. Any suggestions aside from putting an endless loop tape in them to fool them into recording forever? The thing is that the optics on a couple that I have are really excellent, but they are useless if they simply shut themselves off.
to have continuous unit on, please remove your tape and have unit plugged in to AC then it will not shut off I think.
jesterday (author)  bricoleur7 years ago
Well mine was like that too, if there was a tape in the drive, but if there was no tape, then it would stay on.....that would be my only suggestion.
fschuld8 years ago
I set up my Sony DCR TRV 17 as a web cam using this info. But I was unable to get sound from my microphone. THe video was just great.
Myself8 years ago
A technique to do this with digital still cameras would be an incredibly big deal for me. The Canon software supports "viewfinder" over the USB connection, I can control the camera from the PC, but I can't use the viewfinder video as a webcam feed in videoconferencing software. It occurs to me that screen recorder software, grabbing the region of the screen where Canon CameraWindow is displaying the viewfinder, could dump its output to a movie file, then VirtualCamera could read that file and serve it up as a VfW stream.... ugh! There must be a better way.
jesterday (author)  Myself8 years ago
My digital camera a Fujifilm supports a webcam function, but the quality is subpar....maybe there is an option for you out there, have you tried TrackerCam or WebCamDV? Maybe one of those would be able to pick up your viewfinder. I will keep my eye out for something that works with a Canon DigiCam!
jhwee8 years ago
Cool nice find.

Here's another one with DV cams.

WebCamDV from OrangeWare

jesterday (author)  jhwee8 years ago
WebCamDV also works for some analog video capture cards and camcorders, I have used it in the past, but for some reason I prefer this one, and I can't remember the reason as I have been using TrackerCam for a couple years. But the OrangeWare product is also a great option!
lemonie8 years ago
My camcorder came with a manual which told me how to use it as a web-cam, and a CD for the software-install. L Have you plugged into, and pointed it at the TV (for cool feedback)?
jesterday (author)  lemonie8 years ago
That is cool, I guess this instructable is for those camcorders ht don't have the webcam option. I don't have a tv close to my computer, I will have to try it though! Thanks!
You can get some fascinating effects, takes a bit of playing with the zoom & alignment, and you really benefit from a tripod (or a very steady hand) L