Introduction: How to Wear Lehenga Style Saree

For a detailed explanation watch the YouTube Video above.

Lehenga Style Saree Draping -

  • Use a chiffon or georgette saree, for this method.
  • Tuck the end of the saree (non- pallu end) on the right side and bring it around the waist to the back side, tuck it in fully while doing the same. Bring it towards the front again.
  • Drape around the waist again and leaving a length of fabric in the back tuck it in behind.
  • Now bring saree to front make pleats and secure pallu. Now make pleats on the back side of the person and tuck it in the lower back.

Step 1:

Picture of

Use a chiffon or georgette saree, for this method. Tuck the end of the saree (non- pallu end) on the right side and bring it around the waist to the back side, tuck it in fully while doing the same

Step 2:

Picture of

Now hold up the width (pallu) section and make pleats in complete width in 5-6 inches, making sure the border falls on the first pleat to drape it on shoulder.

Step 3:

Picture of

Now make pleats on the back side of the person and tuck it in the lower back.

Step 4:

Picture of

Place the pleats properly on your left shoulder by keeping at least a metre length fall down from the shoulder point, and pin it in place to fix it.

Comments

About This Instructable