Print PDF
Favorite
Email
Step 6FINAL ASSEMBLY
We are nearly complete...just need to add the final casing. Because the 18650 battery is slightly larger than the www.circuitshell.com case depth we have to add some .125" acrylic spacers that are manufactured by www.pololu.com.
Picture 1,2,3. Remove the protective paper from the acrylic pieces.
Picture 4,5. The www.circuitshell.com case must be slightly machined to account for the additional height of the usb connector and power switch. This is done using a wood router table.
Pciture 6,7. Add 4 4-40 screws, acrylic pieces and circuit shell case and VOILA!
Picture 1,2,3. Remove the protective paper from the acrylic pieces.
Picture 4,5. The www.circuitshell.com case must be slightly machined to account for the additional height of the usb connector and power switch. This is done using a wood router table.
Pciture 6,7. Add 4 4-40 screws, acrylic pieces and circuit shell case and VOILA!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
