Step 4: Joining and Painting
So the joints where these typical wood joints, with some screw reinforcements… Combined with wood glue they make a quiet robust joint, so the structure can support the glass weight… You have to consider that if you use 10mm glass you can get a final weight from about 40 Kg just in glass….
After this, the next is painting it in black. I used a water based paint that doesnt smell with matt appeareance. The paint is not a critical point since it wont be perceived through the glass.
After this, the next is painting it in black. I used a water based paint that doesnt smell with matt appeareance. The paint is not a critical point since it wont be perceived through the glass.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
johnxtreme says:
Apr 3, 2010. 10:22 AMReply
what are the dimensions of the table you used?
Visit Our Store »
Go Pro Today »
