Instructables

How to build a Daft Punk Table Replica

Featured

Step 6: The glass

Picture of The glass
C:\Documents and Settings\carlos\Desktop\instructables\5\dsc00470.jpg
C:\Documents and Settings\carlos\Desktop\instructables\5\dsc00567.jpg
C:\Documents and Settings\carlos\Desktop\instructables\5\imagen018.jpg
C:\Documents and Settings\carlos\Desktop\instructables\5\dsc00475.jpg
Maybe one of the riskiest parts of the construction. I covered the table with grey 10mm glass. All the glass was about 180 euros with the sharp edges rounded. The original table has some parts of the glass joined with glue, i think, but as my table was becoming so heavy i wanted a system to suspend the glass so you could unmount it. I made this modifying some coat adhesive hangers and painting them in black, there are four hangers for each vertical glass i think the result was quiet good .Now there are some pictures of the table without the glass and with it:
 
Remove these adsRemove these ads by Signing Up