Print PDF
Favorite
Email
Step 4Interconnection
1) Solder the six wires of the ribbon cable to the Arduino Analog Ins (use shrink tubes).
2) Solder the two prepared strings of stranded wire to the potentiometers and the Arduino.
3) Solder Ground, Voltage 5V and Digital Input #7 to the Arduino.
5) attach Resistor at the 5V wire between Arduino and contact block.
6) Attach the 5V, the Digital In 7 and the Ground to the Contact block.
2) Solder the two prepared strings of stranded wire to the potentiometers and the Arduino.
3) Solder Ground, Voltage 5V and Digital Input #7 to the Arduino.
5) attach Resistor at the 5V wire between Arduino and contact block.
6) Attach the 5V, the Digital In 7 and the Ground to the Contact block.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
