This project should be so easy to build that anybody can build! And best of all, it is free!
Disclaimer: This instructable involves modifying a device that operates on 300v. Use this modified device for educational and self-defense only, using this modified device on other people may results an serious injury or even kill other people. I am NOT responsible for any of actions using this modified devise, the responsibility is yours...
So be careful what you are doing, be safe and have fun!
Step 1: Get the things!!
- One used disposable camera of any kind. (You can get those used cameras for free at photo developing place like at wal-mart.)
- Some wires. (I got mine from broken electronic devices)
- some tape. (I used electrical tape)
- Flat-head screw driver.
- Something to strip the wires, wire strippers or a knife.
Step 2: Slaughter the camera!
(The capacitor in the camera is a large black cylinder thing, it is used for making flashes for the camera, but now we are going to use it to shock people!)
First, pry open the camera's case apart with a flat-head screwdriver or just use your hands if you like, but you are more likely to get shocked by the capacitor.
After you taken the camera's case off, discharge the capacitor with a insulated screw driver, and you may get a big loud spark, and after that, the capacitor is discharged... (Use a screwdriver you hate so much, because a fully charged capacitor will leave a scar on the metal part of the screwdriver!)
Great! You had done the dangerous step on this instructable! (Some people say this is the fun part of the instructable because you get a loud spark from the capacitor.)