Print PDF
Favorite
Email
In this tutorial i will show you how to build your own manual pad
Remove these ads by
Signing UpStep 1Home depot
LIST of materials:
116 X 76 cm plywood
232 CM 90 degree metal rail
3 INCHES LONG FLAT NAILS
and an old box of home depot
NOTE:all of this materials can be purchased on home depot I asked the manager for the old box you can do the same thing :)
116 X 76 cm plywood
232 CM 90 degree metal rail
3 INCHES LONG FLAT NAILS
and an old box of home depot
NOTE:all of this materials can be purchased on home depot I asked the manager for the old box you can do the same thing :)
| « Previous Step | Download PDFView All Steps | Next Step » |
4
comments
|
Add Comment
|
Nov 3, 2010. 12:05 AM1joel8
says:
not to be douchey but thats a fun box but still good build i followed it and already had all the materials but a stronger metal
Reply
2
Dec 14, 2011. 5:32 PMnewb
says:
ummm dude....how is this a funbox? pallets are like the most simplistic form of manual pads
Reply
Oct 6, 2010. 2:38 PMsk8rforlife
says:
Can you gring on the metal or is it not good
Reply
1
Oct 24, 2010. 2:26 PMcarlosmogvip (author)
says:
you can but make sure you buy a hard enough (my mistake) lol
Reply
 |
Add Comment
|
