loading
Picture of How to build a taser for free
This is a very easy, very fast and not to mention FREE way to build a "taser".

Step 1: Parts

Picture of Parts
Parts:

- Disposable Camera - You can get a free*, used disposable camera anywhere film is developed

Optional:

- Soldering Iron
- Copper wire
- Electrical tape

*I've gotten all of mine for free, but I've heard of other people spending up to a quarter for each camera.
 
1-40 of 268Next »
DuartmaN1 month ago

This is my taser https://www.facebook.com/duartecancela/videos/10206755435225425/?l=9132168265921441597

messmaker6 years ago
that doesnt just give u a tingle that thing is deadly. i tried it on my mate and he was on the floor for 5 minutes. like his joints were soldered together.dont try this on ur self. it is seriously deadly with a 1.5v battery (AA) 9v battery... screw that myspace.com/timmywazere
You can't sauder bones. You need metals.
1.5 Volts or even 9 Volts aren't going to hurt you. In fact, electricity wont even flow through you! You can get some sparks from touching it on metal, but it is completely harmless.

he was being ignorant to how it works because of the 1.5v battery that you put inside and assuming if you plug in a bigger battery it will be more powerful when in reality anyone who knows, knows that it isnt 1.5v thats being discharged and that the battery alone couldnt do it

assuming this is a say 300v flash cap do we know a lethal level ? im curious i want a taser but if i throw the wrong cap into the circuit it could go very wrong or right depending if i like a life sentance

You could get a 500-million volt taser with no amps and live. You could also get a 12v one (like a car battery) and 300 amps and die. Amps are all that matter. Yes they are related, but all you need to know is how many volts (volts create sting/pain) and how many amps (amps create death, and even just 1 milliamp, so 0.1 amp could be lethal) when dealing with tasers.

It isn't the voltage that you necessarily have to worry about. What makes an electrical device potentially deadly isn't the voltage but the current. Now, considering the two are proportionally linked through Ohm's law (V=IR) there seemingly is a correspondence between voltage and lethality, but there is no standard set voltage that's considered safe (at least none that I know of). However, if you are to consider current, as few as 100 milliAmps of current are enough to kill you if they pass through your heart (ie: you stun someone right in the chest). So if you have the taser set at a specific voltage, the actual current can vary depending on what the resistance is (which can vary due to environmental factors like moistness of the skin and distance between probes, and so on). All and all, I'd recommend doing a little research into electrical theory before attempting something like this. I would also recommend not trying it out on someone that isn't a threat to you, and certainly not yourself, but I suppose that's just me.

adamnsmith4 years ago
where can you get a "FREE(=" disposable camera i cant find any

If you're in britain Boots is good.

anywhere where they process film.

Costco film department.
Walgreens could work, in the past I used Walmart to get what I needed just by going to the camera section and asking for the used disposable cameras. This only worked for me at one store, the rest of the locations told me I couldn't have them. Good luck!
i think that you can ask around at like walgreens and places like that unno
ryan2898 years ago
u can make these without even taking them apart
ummm.....HOW?

its ridiculously easy, literally attach 2 wires to the capacitor leads then touch those 2 wires on metal or skin and it will do the same thing

i use to do it all the time let me experiment and see if i can remember
are you talking about just breaking the flash bulb out and soldering wires onto those contacts? because a few comments up, someone was talking about that.
no when u take the paper off of it there are 2 holes on the bottom and i know you stick a paper clip in each one
man that is soooo cooool an electric camera! i should add that on my prank list.
so it's a bad idea...
dude, those really hurt...
oh, well i guess that works too.
Aron313 ryan2893 years ago
Make an instructable on it!

how about using five 12v battery with wires?

that would just wear out the circuit way too fast in fact probably short the circuit...

JamesM1110 months ago

it's the flux capacitor. lol

jaret112 months ago

im makin one for science project

electronics :)

ewcrew1 year ago
In short do you charge a flash capacitor and then discharge it onto some one?
THATS a NIIICCCCE GUN U GOT THERE!
dragonzzz2 years ago
I think it was lenz who said the output voltage is dependent on the rate of change of the current,
So if you quickly rub the coil across the battery the faster the connection/
dis-connection the higher the voltage fom the coil.
also always fit a diode in reverse polarity near the battery as when you dis-connest the battery the curren changes negativly and so does the voltage frying everything
tswannell3 years ago
hey could u or someone show me a simplised circut like so u dont have to go buy a 15 dollar camera to make this cause i got a capaciter and a battery and some wire and some other stuff
Get them free from costco film department.
Tobor 2.04 years ago
your kidding me right. I disabled a dis. camera with the same data board to make an E.M.P. generator and i got shocked by it. it didn't hurt at all!
an e.m.p you say? you can make small range ones with capacitors and coils of wire. but true e.m.p's with any range require a large amount of capacitance, at a high voltage, and call for a coil to be suspended inside a metal tube. then at the moment of discharging the charge through the coil an explosion must take place. at one end of the tube. thrusting the coil down on the tube one turn at a time in rapid succession, creating a short circuit and forcing the magnetic wave of energy into a smaller and smaller space. compressing it. until the last coil touches and it explodes from said device carrying a large amount of energy and covering a fair distance. transferring its energy magnetically to wires and components in electronical devices (most of them are shielded so any real damage would take a lot of energy) causing voltages that are too high and currents to flow wrong ways. destroying said devices :3 you might be able to get it to knock out those little pocket games you can get at target though :D
I didn't say it worked I was prototyping an E.M.P., honestly people stop jumping to conclusions
Buy a bigger compacitor for radio shack!
mrwaffles23 years ago
Wow I built one of these after doing a little research and I must say they work great! Even though I am (defiantly) below the age where I can legally buy a taser I am guessing that this is almost as good.
Shawster BG8 years ago
I havn't tried it yet. Though it would obviously work, I havn't been able to find a ***FREE*** disposable camera.
1-40 of 268Next »