Print PDF
Favorite
Email
Step 3Schematics
Here are the electronic schematics for the AIRduino Guitar.
As you can see, it is pretty easy to understand and therefore also to build.
Look at the image if you want an idea of which component goes where. As you probably understand, this is no to scale in any way. The cables are much longer than shown in the schematic.
You might also have noticed that the emitter of the ultra-sonic sensor is on the stick and the receiver is on the left hand. That is the tricky part I have mentioned earlier: You must unsolder the ultra-sonic emitter from the ultra-sonic sensor unit in order to separate it from the sensor board.
More about that in later steps. Now let's get to work!
As you can see, it is pretty easy to understand and therefore also to build.
Look at the image if you want an idea of which component goes where. As you probably understand, this is no to scale in any way. The cables are much longer than shown in the schematic.
You might also have noticed that the emitter of the ultra-sonic sensor is on the stick and the receiver is on the left hand. That is the tricky part I have mentioned earlier: You must unsolder the ultra-sonic emitter from the ultra-sonic sensor unit in order to separate it from the sensor board.
More about that in later steps. Now let's get to work!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
