How to build an attractive, space saving upside down planter.

Step 7: Hanging the planter

The planters used in this project were attached to a block parameter wall, so two holes were drilled into the back of each box to accommodate the screws and masonry anchors. These holes were then copied onto the wall where the planter was to be hung, using a masonry drill bit, a hammer drill and 1/4" x 2 1/2" masonry screws with a 5/16" masonry drill bit. The screws used in this project came with plastic anchors that were placed into the newly drilled holes. There are many other possible alternatives, but that is a personal preference.