Introduction: How to Build Guitar Amp

Picture of How to Build Guitar Amp

Now i going show how to build a easy guitar amp

Step 1: Parts You Will Need

Picture of Parts You Will Need

Step 2: Wire Them Up to This Diagram

Picture of Wire Them Up to This Diagram

Step 3: Build a Boxx

and you done


djfrizz (author)2014-02-20

Just looked at your build quite some time after it was done. The video was not available, although it may still be on youtube. This part is not any fault of yours that I can tell. You may have wanted to add what amp you used if it was purchased as a completed/assembled unit as are available from different audio or electronics venders. If it was a diy/kit you may have wanted to list the parts used in the amp build.

nurdee1 (author)2012-02-20

This isn't what I consider helpful.

CROmakers (author)2011-03-13

Part LIst::::

8 ohm Speaker
220Vac to 12 v Transformator
PC Speaker Amplefire
6.5mm Audio jack Female
A cord
Soldering iron and solder

kenkaniff (author)2011-03-12

Some words would be nice...especially a parts list

Scott_Tx (author)kenkaniff2011-03-13

Parts needed: 1 guitar amp.

kenkaniff (author)Scott_Tx2011-03-13


About This Instructable




More by CROmakers:How to build guitar amp
Add instructable to: