Print PDF
Favorite
Email
Step 6Mark your territory
Mark the current position of the outer tie-rod end with spary paint or nail polish, or whathaveyou
THE FOLLOWING IS NOT NECCESARY FOR THIS INSTRUCTABLE:
At this point, you can use a 19mm open wrench and a pair of vice-grips to remove the outer tie rod. Secure the vise-grips to the outer tie rod's flat spots, use the box wrench to loosen the locking nut, then unscrew the outer tie-rod. Count or mark the threads. If you were just doing the outer tie rod, you'd be done here.
THE PRECEDING IS NOT NECCESARY FOR THIS INSTRUCTABLE:
THE FOLLOWING IS NOT NECCESARY FOR THIS INSTRUCTABLE:
At this point, you can use a 19mm open wrench and a pair of vice-grips to remove the outer tie rod. Secure the vise-grips to the outer tie rod's flat spots, use the box wrench to loosen the locking nut, then unscrew the outer tie-rod. Count or mark the threads. If you were just doing the outer tie rod, you'd be done here.
THE PRECEDING IS NOT NECCESARY FOR THIS INSTRUCTABLE:
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
