Instructables
This is a simple way to clean knives.  This is not for commonly used knives unless they are just a little dirty it is made for collectors knives that you want to shine.

sorry for crappy photos my camera broke and i had to use my cell
 
Remove these adsRemove these ads by Signing Up

Step 1: Supplies

a knife
2 glasses cloths (or normal cloth/paper towels i highly recommend the glasses cloth though)
a dish towel
a sink (not shown)

Step 3: Cleaning the case

1. Wet one side with wet glasses cloth
2. Dry with dish towels it will leave streaks but don't rub more just let it set for a few secs
3. repeat on other side and it shines beautifully

Step 4: Making a nice setting

Picture of Making a nice setting
Rules for a good setting

1. Do not over do it with a million things
2. Do not put so few things that no one looks at it
3. Do not leave wide open areas.
4. I find a good backdrop (in my case books) makes people look at it
5. I also found that something in front (in my case belt buckles) makes people look
6. Make sure the knives are the center piece

Step 5: Q and A

If you have any questions or suggestions please leave a comment.
zhamilton12 years ago
Shoot me an email at zane.hamilton.1999@gmail.com! I wanna talk with you about that Case knife. I've been a collector for about 6 years of Case knife's and that looks pretty interesting. Interested in selling?
jackman 0074 years ago
i have a knife that looks similar to the bulldog knife and heres a description of it it has two blades one on either side and 1 is shorter than the other it has a plastic handel but it looks like wood it has the same shield thing as the bulldog knife on the shield side on the longest blade it has printed I then a small star then XL on the base of the blade there is this I XL GOEGE WOSTENHOLM SHEFIELD on the other side it has oil the joints and on the smaller blade it has I XL GOERGE WOSTENHOLM
Shadowpom (author)  jackman 0074 years ago
 Nice i don't believe the knife you have is a collectors it might be collectors edition which i don't like because they are mass produced.  I only get the hard to find limited edition or prototypes my use around the house knife is collectors edition but i didn't post it. so here is a photo it has 1 corinthians 1:18 on the blade not carved in just plated on it and its just the verse number not the verse
Picture0005.jpg