Print PDF
Favorite
Email
Step 8Frame out walls
This step really happens right in the middle of the prior step, since the wall studs keep the ceiling frame in place. I only mention this step as a standalone because of the technique used to secure the wall studs to the ceiling and the floor. After perusing Home Depot, I found an assortment of framing connectors. You can see from the pictures that each wall stud was secured both to the ceiling frame and the floor using L brackets. The standard spacing between studs is 16".
One big benefit I have is an electrical outlet inside the closet. However, I was concerned with the wall plate bulging out, and perhaps pressing against the wine rack. My solution was to install the wall plate behind the drywall and then use plenty of drywall compound to smooth out the edges. The pro is that the outlet is now recessed. The con is that if I ever need to service that outlet, I'd have to cut out the drywall.
One big benefit I have is an electrical outlet inside the closet. However, I was concerned with the wall plate bulging out, and perhaps pressing against the wine rack. My solution was to install the wall plate behind the drywall and then use plenty of drywall compound to smooth out the edges. The pro is that the outlet is now recessed. The con is that if I ever need to service that outlet, I'd have to cut out the drywall.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
