With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Convert your DS-1 to Keeley All seeing eye and ultra mods. I own and operate the site http://www.geocities.com/overdrivespider and wanted to give this information to a wider audience ...
For these mods you will need:0.1uF Capacitor x 51uF Capacitor x 4 (or two 0.47uF caps in parallel, it should give the same results)0.047uF Capacitor x 13mm LED ...
Remove C1, C3, C5, C12, C13 - these are silver in colour and look like they are covered in plastic (see below diagram) Remove C2, C8, C9, C14 ...
Place a 2.4k resistor in R13Place a 20k resistor in R39Place a 1.5k resistor in R14C1, C3, C5, C12, C13 all need to be installed with 0.1Uf CapsC2, ...
Just a little warning - this is the hardest part of the mod.First of all, its worth noting that it is a lot easier to not use a ...
If you have used a switch this is important, you have to decide where to put it! The most room is on the sides just below the jacks, ...
Clip 1Clip 2Clip 3Clip 4
Modify Your Boss DS-1by James Haskin
Boss DS-1 grit modby d34dmeat
Tube Screamer cloneby jonboytang
Bass Mod DS1 Pedalby greggolf
Boss TR2 C4 Modby raxel
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »