How to create a smoothie making human powered bike blender for less than $25

Step 10 Attach metal plate

This step is best accomplished with the bike upside down. Once the bike is flipped, align the blender assembly in the same position you had it in step 9.

Then place the metal plate on the bottom of the bike rack. Make 4 marks where the corner holes line up with the wooden base.

Drill out these holes so that they fit the 4 bolts you have.

Then, with the bike still upside down, push the bolts through the plate, through the bike rack, and out through the wooden base. Lightly twist on the nuts so that the base can still be adjusted.

Then flip the bike back over.

Adjust the base of the blender so that the friction wheel sits against the back tire, and then tighten down the remaining nuts.

Comments

[wasnotrice]

[Warlrosity]

.

[mackintoshlinessless]

how do you do that