Print PDF
Favorite
Email
Step 2Make a berm out of beach sand
Survey the beach. You will notice a definite difference between the sand that gets pounded by waves, and the dunes that don't get wet no matter what time of day.
1) Pick a low spot at the edge of the dune/wet sand border.
2) Lay the sail down on the sand and spread it out flat.
3) Trace the size of the sail on the sand.
4) Dig a trench approx. 2 ft. inside the traced triangle, and place the excavated sand within the 2ft border (inside the trace), and place some sand in a pile in the middle of the triangle.
5) Keep digging until there is about 2" of water in the trench.
1) Pick a low spot at the edge of the dune/wet sand border.
2) Lay the sail down on the sand and spread it out flat.
3) Trace the size of the sail on the sand.
4) Dig a trench approx. 2 ft. inside the traced triangle, and place the excavated sand within the 2ft border (inside the trace), and place some sand in a pile in the middle of the triangle.
5) Keep digging until there is about 2" of water in the trench.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
