Picture of How to do engraving easy and make it look decent
engrave 013.jpg
engrave 001.jpg
engrave 005.jpg
The kind of work I do entails that I either label my tools, or keep buying replacements for the ones ending up in other guys tool boxes all the time. most guys have their initials engraved freehand and it looks like their 4 year old did it for them... left handed... while drunk. I wanted to figure out a way to do it nice and this is what I came up with:

This instructable will show how to engrave something and make it look really nice with very little extra effort or skill required.


mailing labels or any other printable sticker material.
engraving pen- I got mine for $12.00 from Canadian Tire
something you need to engrave. (you might want to do a practice one first, don't start on your wife's wedding band just yet)

Please check out my other instructables and I also have a diy podcast called mechanicalmashup.tv

Step 1: Image

Picture of Image
Use your favorite imaging software to create your name in just about any font you want to use. Just remember that you are going to use an outline (at least in the beginning) I tried a fill once and found it very time consuming and hard to make it look good.

You can dress it up with some fancy art around the name but since that is probably a good way to get myself beat up at work, I'll just make it plain here. You have to be careful not to go too fine into the details because some of the paper gets damaged while you are engraving, you will see what I mean when you try it, just trust me for now.

Print out your image onto mailing labels or sticker paper. I try to do most of a sheet and I print it out a few different sizes to have some extras around and to be able to fit it the best possible way.

Trim the label if you have to and stick it to the tool where you want to engrave your name. Push it down good because we don't want it to slide when we start. Also the better it is stuck down, the less the paper seems to get damaged.
ReaganK15 months ago

I used a tool just like this to engrave the band around a gavel. Is there any way to add black into the engraving to make it stand out more?

After engraving, take a sharpie and fill in the letters. Put it on heavy so it will sink into the crevasses. Then simply wipe off the area.. The paper towel will remove only the surface and not the letters. If you mess up, use rubbing alcohol to start over.
jscanlan8 months ago

You used a vibrating engraver not a rotary?

cnlson110 months ago

I actually was just going to engrave my name on my multi tool and read this. I just used an ink pen to write my name on the tool as a guide and it worked perfectly.

thank you for sharing!

How do I engrave my name on my engraving tool? ;-)

pfred24 years ago
I have lots of engraved tools, people's initials, their first names, stuff I don't even know what it stands for. I think it really adds to the charm of a tool. I even engraved my name on a tool once, now I guess I'm immortal.

I don't have a Spencer yet though, I'll have to keep my eyes open ...
Cooldeal pfred24 years ago
Lol pfred2. Spencer your tools now look like they were made by the Spencer company, like other brand name tools. If your last name was Crescent or other brand tool name you can get tools to wind up in your box for free.

I did this with thin paper and contact cement. Stuck really good and after I cleaned with acetone and solvent cleaner it was excellent. Using a pair of good magnifying glasses helps keep the engraver steady on the lines. Nice tools btw.
pfred2 Cooldeal4 years ago
The only engraving that is going to help is an engraved reputation for beating the snot out of anyone taking your junk! All any effective security ever is is violence. I don't really think the threat of I'll deprive you of what's already mine is quite enough to slow too many down either.

LOL indeed.
Cooldeal pfred24 years ago
Yeah that always works. But sometimes like in my shop I have apprentices and helpers who might have to put scattered tools back on the owners' benches or tool box. Sometimes I borrow a tool many times a day and might forget who I got it from. So instead of holding it up in the air and shouting who's it is I can just look at the neat engraving and save my arm and vocal cords.

pfred2 Cooldeal4 years ago
If you're using a tool many times just leave it there. Go out and get one special for the spot and leave it. Makes things go a lot more efficiently and easily. Some tools are just meant to be scattered.

I think my vertical mill has a better tool collection than most people do, and they belong to it. It has its own roller box and everything! Just saying.
static5 years ago
 A drunk 4 year old, LOL. Great tip thanks for posting it.
John Smith8 years ago
Look, It works! I printed out the second image below, and engraved it. It took a while, but it turned out great. The picture is kind of hard to take, with the flash, so it's at a angle.
Foundry & Forge 036.jpgstencil.png
 Looks fantastic. I don't know if a I can stand holding the vibrating engraver I have long enough at one sitting to get it done very fast.  The artwork is very appropriate for use on the grave memorial of a welder.
dave spencer (author)  John Smith8 years ago
looks great! Congrats
hmmm... Perhaps I can combine this with the snail painting instructable. i don't know if the snails would be too keen about it.
Geez Garth. It will be like giving your snails a little shiatsu massage.  They'll love it.  People pay good money for shiatsu.
waif697 years ago
That is a good idea, simple enough for me to think "Why didn't I figure that out myself?" Thanks for sharing!
joknrok7 years ago
Great idea. And that center punch is beautiful. Well done.
mattie8 years ago
The engraving looks terrific. How much would you charge to do some for me?
John Smith8 years ago
Looks great! I got a Dremel brand engraver for christmas, but it was hard to get good results from it. This would work for simple pictures too, right? Also, what font did you use? If you can, could you tell me where you got it, and it's name?
dave spencer (author)  John Smith8 years ago
It would work great for pictures too. Sorry about the font, I made the mistake of downloading a zip file from the net (I don't remember where) with 10,000 fonts in it! Makes it very hard to remember which one you picked unless you save it. One of these days I am going to go through and weed a couple thousand out.
This is what I plan to print out on sticker paper, cut apart, and engrave.
Buckskin8 years ago
I did this on a couple of knives and it worked great.
Vendigroth8 years ago
i've got one of those engravers, i use it to, well, engrave things Usually on the tangs of the knives i make, though that DOES sound just a little bit ghoulish...
lennyb8 years ago
very nice. i used to mark the knives i made using a stencil like that but instead of tracing the out line i would cut it out with a razor blade and use gun bluing to stain the steel black{doesnt work on chrome or stainless} i used photographic splice tape from film splicers and drew the outline i wanted in fine maker before triming it out. nice to put logos on swords.
lemonie8 years ago
Your tool looks like something worth engraving too. I have some poor-quality tools at my didposal... Good work L
Marqis8 years ago
Good idea. An even better one would be to use the label maker that you probably have at work and trace that. The output, not the actual label maker. ;)
PetervG8 years ago
Today I just bought a 1$ engraver and that works fine.
pharoah8 years ago
Cool, Never new it was that cheap and easy to do :)
i did this last christmas, engraved the name of a funeral home on a rock to put in their aquarium. i filled in all the letters, it took me about 4 hours to do but it looked cool
dataphool8 years ago
Nice Idea! How many other lack-wits out there will read this and decide their brains have been residing in their asses for a lifetime.

Really good idea!
dchall88 years ago
Sometimes the simple ones are the best ones. I had to engrave a serial number in something in college and realized I suck at freehand writing with a vibrating pen. I think I could do this.
nice work, looks sharp.