This is my first Instructables so please be kind.
In this Instructable I will show how to fix an airsoft pistol. (this might be different in others I'm not sure)
Step 1: The Tools You Will Need
So these are the tools you will need.
-a small screwdriver probily a phillips(the cross one)
-a larger flat headed one to loosen big bolts
-a thin one to shove down the barrel for later( only have 2 because the second and third were perfect for both)
Step 2: Start Unscrewing!
Now take your large screwdriver and unscrew the screws on each side.By the way sorry about my spelling I got a D-.
Step 3: Almost Done
Now that were almost done pull off the side panles and the clip/magizne holder and go to the next step.
Step 4: Last Step
Ok now all you have to do is un screw this little screw with your screw driver. Put it all back togeather, shove the long thin screw driver down the barrel cock the gun and fire!
I hope this instructable was helpful and please rete and comment. Happy hunting.