Instructables

How to fix your swamp cooler ("Overclock" it 50%)

Featured

Step 3: Shut down the power and lock out the power

ok. Go to the power switch and turn off the swamper. Then take some duct tape and tape it off. Then put a little sign that says not to turn on the power. (if someone turns on the fan motor while you are in there you will get hurt.) Also, you can unplug the fan motor up in the swamper for extra safety.
OK.. notice that there are 8 tubes on the distribution assembly, 2 on each side. We are going to add 1 tube to each side taking the total tubes to 12, our 50% overclock.
 
Remove these adsRemove these ads by Signing Up