Print PDF
Favorite
Email
Step 3Take care of the plate
Depending on which kind of key you have, it might be larger than the hole in the plate. If it is, then take the 4 side file and sand the top and bottom. Continually test the key, to make sure you have a good fit. Alternatively, you could use a dremel.
Once that's done, you want to mount the plate on the wall. You need to make sure it's NOT on a stud, just in drywall. This is so the key can go in without any issues. Don't forget to use a level!
Once that's done, you want to mount the plate on the wall. You need to make sure it's NOT on a stud, just in drywall. This is so the key can go in without any issues. Don't forget to use a level!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
