How to Install a SATA CD-ROM Drive?

This instructable is teaching you how to install a CD-ROM drive inside a CPU. The steps were easy and clear. And it has high quality images for you easily understand.

Step 1:

Remove the CPU case.

Step 2:

Remove the drive bay cover where you put the CR-ROM drive.

Step 3:

Insert the CD-ROM drive inside the drive bay. Make sure to insert it slowly smoothly, or else it will get stock.

Step 4:

Fasten the CD-ROM drive with the locking mechanism, to let it steady.

Step 5:

Connect the SATA power cable to the CD-ROM drive.

Step 6:

Connect the other end of the SATA power cable to the power supply.

Step 7:

Connect the SATA data cable to the CD-ROM drive.

Step 8:

Connect the other end of the SATA data cable to the motherboard.

Step 9:

After installing the CD-ROM drive and the cables, close the CPU casing.