Step 7:

Next put the new fan spacer on by mounting the spacer on the pulley.
Next put the fan on make sure that you match the holes from the fan and the fan spacer
LOOSELY put the bolts on using the required hardware, or if you want, go to the hardware store and buy grade 8 hardware
Tighten the bolts down using the same X pattern you used to loosen the bolts with
Torque down with torque wrench I did mine to 25ft lbs
Good info, but you have to be aware of a Phenomena called &quot;Electrolysis corrosion&quot; which can literally &quot;eat&quot; an aluminum radiator in a matter of weeks!<br> Electrolysis is created when an electrical stray current uses the aluminum from the radiator, coolant pump or other cooling system components to become &quot;anodic&quot; and sacrifice themselves.<br> <br> One quick way to test for the presence of electrolysis in your vehicle, is to connect one test lead of a Digital Multimeter to the negative post of the battery, and then submerge the other test lead into the coolant just under the filling cap touching only the coolant (engine not hot, obviously!) anything above a couple of tenths of volt is of concern,&nbsp; Visit several of the many websites describing the causes and cure of this before thinking your new radiator is installed and forgotten.<br> Best Wishes, AMclaussen, Mexico City.

About This Instructable




Bio: Hi All! I like to learn, Period. It does not matter what it is. I then try to pass any and all knowledge that I ... More »
More by mfrontuto:How to replace the master window switch in a 04 Impala How to fix a noisy fan on a ATI Radeon HD 5870 video card  How to replace the battery in a TomTom XXL 550 GPS Unit  
Add instructable to: