Print PDF
Favorite
Email
Step 5Hotglueing.
Use a glue gun made for home use, not an industrial one. These have a lower temperature, and will not go nuclear on the plant tie and cause a meltdown.
Start gluing in between the spirals/rings with your hot glue gun. Use plenty of glue. Don't be too neat; real horns have knobbly and uneven bits in them. Really important: don’t miss any spirals out, even if they are close together. Use extra glue where there are larger gaps. It’s better to use too much glue than too little.
Let the hotglue fully dry and harden before the next step.
Start gluing in between the spirals/rings with your hot glue gun. Use plenty of glue. Don't be too neat; real horns have knobbly and uneven bits in them. Really important: don’t miss any spirals out, even if they are close together. Use extra glue where there are larger gaps. It’s better to use too much glue than too little.
Let the hotglue fully dry and harden before the next step.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
