Instructables

How to make EL Wire Art

Featured
Picture of How to make EL Wire Art
This instructable shows the steps for doing EL wire art, by gluing it onto an acrylic plastic background.
 
Remove these adsRemove these ads by Signing Up

Step 1: The Parts

Picture of The Parts
EL wire, el wire driver - acquired from http://www.neonstring.com

Black Acrylic plastic - acquired (free scraps) from Regal Plastics in Houston

Glue/Adhesive (IPS WELD-ON 3) - acquired from Regal Plastics in Houston

Plasticator squeeze bottle applicator - acquired from Regal Plastics in Houston.

Printed image - from the Internets or your artistic ability

drill

exacto knife

EL wire soldering materials - see: http://neonstring.com/index.php?tasket=solder

Step 2: (Optional) Download free "Paint" program from getpaint.net

Picture of (Optional) Download free "Paint" program from getpaint.net
If you don't have Photoshop, you can get a scaled down program for free at http://www.getpaint.net . You may be able to just use MS Paint. (To make/edit the picture that will be used as your template.)

Edit: Someone has suggested that I mention GIMP here, which they prefer to Paint.net, and is also free. http://www.gimp.org

Step 3: Pick Subject Matter

Picture of Pick Subject Matter
Decide what kind of image you want to make. It should be something that would work well for EL wire. If using 2.5mm EL wire, try to avoid images requiring lots of points or sharp angles. 2.5mm EL wire can be damaged by forcing it into a sharp angle, even a sharp 90 degree angle. Once you have the image in mind, you can draw it or look it up in Google Images. Save the image, open it in your Paint program , and adjust it if necessary. Since it will be printed, try to reduce it to simple black lines on a white background, to avoid using a lot of ink. Resize the image to the size you want it to be in your completed artwork. Use Print Preview to see if it is the correct size. I have chosen the biohazard symbol, because it looks cool like a big dog, and I decided to use the angel hair 1.2mm wire because of the sharp angles. Angel Hair EL wire has a much smaller bend radius than the 2.5mm high bright wire. 1.2mm EL wire may not be as bright as the 2.5mm wire, but the biohazard symbol has some very sharp points that would be difficult to create with 2.5mm wire.
valkgurl6 months ago

I think for over the Pond friends that Plexiglass is called PERSPEX also.What airplane cowling is made of---will scratch if not careful but comes in lots of thickness' and colors.

Can this stuff be used outdoors ie could it be used to outline a motorcycle engine? We have a very chrome heavy engine with lots of overhangs--this is NOT a V-6!!!!---and the LED strips we got just don;t do what we want where we want it--and I am NOT spending several hundred for a few strips of "pro installed" LED's!!!!

Any place to get more info or see this stuff in person that anyone can think of? A different maker said Radio Shack sells this but do they have it on display?

CypherSoarize7 months ago
Nice work. I always wondered how EL wire worked but never got around to looking up the info. Now I don't need to. LoL
djsfantasi7 months ago
Also see my last comment. Dental tools with a broad tip will work as holders, too. (I love my dentist!)
djsfantasi7 months ago
I've asked my dentist for any tools that have broken or that he would otherwise discard. They are useful for scratching guide lines in plastic. In this case, I would use a tool whose tip had broken off and I ground/filed to a scribed. Also, I use them for detailing models, sculpting forms for casting, etc...
phazerave3 years ago
isnt el wire breakable if you bend it at too much of an angle? or am I mistaken. obviously you did it but is there a technique for bending it so sharply?
GlowWireGuy (author)  phazerave3 years ago
2.5mm and 2.6mm EL wire won't break if you bend it on too sharp of an angle. What can happen is that you can end up with a little area of darkness at the bend, or you could possible break one of the hair thin radial wires. (I think the wire would still light just as brightly with just one of the radial wires intact.)

But for this Instructable, I used the tiny 1.2mm wire, aka "angel hair" wire. It seems to be much more forgiving, because I really pinched the wire to get those points as sharp-looking as I could, and there were no failures, no problems.

I knew getting sharp points with 2.5mm wire would be very iffy. On the Jack-O-Lantern, I used 2.3mm orange for the teeth, and I pinched them really hard to make the teeth look pointy... and the wire failed completely - I had to pull the EL wire off the mirror, wiggle it around until it worked, and re-glue it. So apparently, if you need to make some sharp points, 1.2mm wire is the way to go... although this Instructable here:

http://www.instructables.com/id/Removable-EL-wire-art-panels/

shows a brilliant way to get sharp looking points without actually stressing out the EL wire with any sharp bends.
drhoff3 years ago
the one with the sequencer is especially sweet!
GlowWireGuy (author)  drhoff3 years ago
Thanks drhoff. I like it too :)
geraghty3 years ago
can anyone here tell me a good supplier for el wire with a good price. I am thinking of making name signs in a perspex casing and selling on a stall. but want to give the public a good resistable price. thanks for reading and hope someone can help me.
GlowWireGuy (author)  geraghty3 years ago
I recommend NeonString.com, Coolneon.com, Coolight.com, and ElWireBestBuy.com.
thanks GlowWireGuy will check them out later.
9ale73 years ago
great tut , specially the wiring on you're website.
GlowWireGuy (author)  9ale73 years ago
Hey thanks! Much appreciated! :)
personally i think it looks quite slick being asymmetrical like that... especially if it were hung on a wall.
GlowWireGuy (author)  andrew.barthle4 years ago
It would make for an interesting book cover. :)
strmrnnr5 years ago
Question: With this EL wire - if you were to make a groove into clear acrylic and inlay the wire - would the light spread through the acrylic like fiber optics?
GlowWireGuy (author)  strmrnnr5 years ago
Well the light would spread through the acrylic, but you would only see it on the edges, or in any scratches or imperfections in the acrylic. If you go here:

http://neonstring.com/index.php?tasket=videos

And look at the third video (the Jack-o-lantern one), you will see what I mean. When it shows it from behind, you can definitely see the edges illuminated.
Shut Up Now5 years ago
do you think it would work with clear plexiglass which i would spray paint black at the end? would that work?
GlowWireGuy (author)  Shut Up Now5 years ago
On Wikipedia, it calls plexiglass "acrylic glass" so it might work. A plastics shop like Regal Plastics could probably help with that question.
I apparently wasn't totally clear, I was not really wondering how much pressure you could put on it as much as how far will it flex and if you were to use it for something that abused it, I don't know what but how resilient is it?
I'd love to try this some time, some things I want to know first though are, how tough is the wire? and how hard is it really to wire up, there's not a whole lot on Instructables on wiring it up and I can't tell from pictures.
GlowWireGuy (author)  Ben The Builder5 years ago
Well as far as tough.. you could run over it with a car and it would probably be okay. The 2.5mm stuff is the brightest, and I prefer to work with that than the skinnier 1.2mm wire used here. But I had to do those sharp points, so I used the 1.2mm. I really pinched the wire hard to get the sharpest points I could, and had no problems at all with the 1.2mm wire. When I have forced the 2.5mm wire into sharp angles, I have seen it create a black spot on the wire, or cause the wire to fail entirely. The jack-o-lantern's teeth for example, failed at first, but I wiggled it around and it came back on. (2.5mm)

As for the wiring, there are already Instructables on soldering EL wire, and I have very detailed, illustrated, step-by-step instructions on my website, here:
http://neonstring.com/index.php?tasket=solder

danm955 years ago
can you over charge the EL wire?
danm95 danm955 years ago
PS could you use a 12 volt or would it fry it?
GlowWireGuy (author)  danm955 years ago
Well you can't really overcharge it. If you want to light up a 5 foot section, and want it especially bright, you can use a driver designed to light up 30 feet. You wouldn't want to light up two inches of EL wire with that same driver, because you risk frying the driver if there is not enough of a load.

Many EL wire drivers are powered by 12 volts. There are EL wire drivers that run off of two watch batteries, some that use a AAA battery, some that use an AA battery, a 9 volt battery, 12 volts (cigarette lighter plug or 8-AA battery pack), and some drivers you can plug into your household electrical outlets. It just depends on
1. How you want to power it,
and
2. How much EL wire you are powering.

There is more about EL wire here:

http://neonstring.com/index.php?tasket=faq
Doctor What5 years ago
In the optional step 2, you might want to mention GIMP. It's much better than paint, and it's also free! (It works well too)
Shut Up Now5 years ago
wow this is some cool stuff. seeing how cheap acrylic is, i am going to get some for a bunch of projects and hopefully i will make something with el wire too. also the last picture on the last step is awesome.
GlowWireGuy (author)  Shut Up Now5 years ago
Here is a video of that last one in motion:

http://www.neonstring.com/index.php?tasket=videos
animal03075 years ago
I wish I had seen this before I did my computer case mod. Very nice. I like the flashing.
Amazing. I think I'm going to make one :) Thanks, Joe
lemonie5 years ago
Is neonstring.com your company? L
GlowWireGuy (author)  lemonie5 years ago
Yes
You make some cool stuff! L
jeff-o5 years ago
Maybe latex gloves would help a bit with the smudges. At least the smudges won't be fingerprint-y.
GlowWireGuy (author)  jeff-o5 years ago
That's a great idea, thanks. I may have to try that next time.
jeff-o5 years ago
Maybe that clear piece was polycarbonate, which doesn't glue as easily as acrylic.
Scott_Tx5 years ago
Nice looking. That'd be good for computer case modding too.