Instructables

Step 2: Cut out the center.

Picture of Cut out the center.
Be careful while doing this. Cut out as much of the center cylinder shape as possible. You should end up with about 1/8" left since the angle of the blade doesn't allow to remove all of it in one step.
 
Remove these adsRemove these ads by Signing Up
bill oddie5 years ago
this is a satisfying instructable, and it makes my old toyota corolla, look like its been on pimp my ride.(well, if you look close enough.) *on this step instead of taking out the inside bit of the lego brick with a stanley, i used a verticle drill.