With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
I can't take credit for this idea. Several years ago I had seen a Lego Edition Ford F-150 with blocks for valve stem caps. I decided to make my own. I...
1) How ever many blocks and which ever color you desire but they must be 2X2. 2) Metal valve stem caps. 3) Hot glue gun. 4) Utility knife. 5) Small fl...
Be careful while doing this. Cut out as much of the center cylinder shape as possible. You should end up with about 1/8" left since the angle of the b...
Now, make the next cuts in the cylinder, straight down. The cuts should be close together. This will allow you to push the pieces back, breaking them ...
Your block should look like this. You want to clear as much of the cylinder out as possible to avoid having alot of the metal valve stem cap exposed o...
Fill it roughly 3/4 full. It goes without saying that you don't want to make a mess but you want to try to have excess squeeze out once the cap is ins...
Insert the cap all the way into the block. Use the screwdriver to center and level the cap inside the block.
The cooling process can be sped up by placing the block in the freezer for a few minutes. You will need to first off, BE CAREFUL and second, remove th...
Hopefully without any blood loss.
Felicidades! You have made a Lego block valve stem cap. Make three more and you have a complete set. These bad boys should increase the coolness of yo...
Pneumatic Animatronic Lego Snakeby benthekahn
Lego Windmillby reallynow
LEGO USB Flash drivesby awesomecreations
Custom Bicycle Tire Valve Capsby Tater Zoid
Lego Pneumatic Bike Pump Adapterby benthekahn
LEGO flash drive key chainby wrylieg
Lego Man RPG launcherby taming856
How to create a Lego Convertibleby AngelsAndArrows
Airboat Lego Projectby jjevjen
Flash Flash Driveby BrittLiv
Download our new apps for iOS, Android and Windows 8!
© Copyright 2014 Autodesk Inc. All rights reserved.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.